Additional functions
Buzzer
An audible tone sounds at the end of
the programme or if there is a fault.
You will hear the buzzer at the end of a
programme in bursts of five with a short
pause in between. The buzzer will
continue to sound for up to an hour if
you do not switch the dishwasher off.
In the event of a fault, the buzzer will
sound continuously for up to two
minutes if you do not switch the
dishwasher off or correct the fault.
The buzzer is activated as standard at
the factory.
You can deactivate the buzzer at the
end of a programme if you wish. The
buzzer will still sound if there is a fault,
even if it has been deactivated.
^
Open the door.
^
Switch the dishwasher off with the Off
button
V
.
^
Press the programme selector button
;?
in, and
whilst holding it in
switch the dishwasher on using the
On button
U
.
Keep the programme selector button
;?
pressed in for until the lower
right hand programme indicator
comes on.
If this does not happen, start the
procedure from the beginning again.
^
Press the programme selector button
;?
four times briefly.
The Inlet/drain check light
2
/
2
will
flash briefly four times at intervals.
The upper right hand programme
indicator light shows whether the
buzzer at the end of the programme is
activated or deactivated.
– If the upper right hand programme
indicator is flashing: the buzzer is
activated
– If the upper right hand programme
indicator is not lit up: the buzzer is
deactivated
^
If you want to change the setting,
press the programme selector button
;?
for at least one second until the
Inlet/drain check light
2
/
2
comes
on.
^
Press the programme selector button
;?
briefly.
The setting is now stored in memory.
^
Switch the dishwasher off with the Off
button
V
.
Operation
36
Содержание G 1171
Страница 61: ...61 ...
Страница 62: ...62 ...
Страница 63: ...63 ...
Страница 64: ...Alteration rights reserved G1171 G1172 G2171 G2172 4407 M Nr 07 001 971 00 ...