Miele G 1021, Руководство по эксплуатации

Страница: 36 / 64

Additional functions
Factory default setting
If you have altered any settings from
the factory default, you can re-set them
back to the factory default settings as
follows:
^
Switch the dishwasher off using the
K
button.
^
Turn the programme selector to the
"12 o'clock" position.
^
Press the Start/Stop button
J
/
M
in,
and whilst holding it in switch the
dishwasher on using the
K
button.
Keep the
J
/
M
button pressed in
until the
J
/
M
indicator light comes
on.
If this does not happen, start the
procedure from the beginning again.
^
Turn the programme selector to the
"11 o'clock" position.
The
8
programme sequence indicator
light will not come on.
^
Press the
J
/
M
button.
The
8
programme sequence indicator
will flash briefly once at intervals.
^
Turn the programme selector to the
"9 o'clock" position.
The
8
programme sequence indicator
light shows whether a setting other than
the factory default setting has been set.
– If the
8
programme sequence
indicator light is flashing:
All settings are factory default
settings.
– If the
8
programme sequence
indicator light is not lit up:
At least one setting has been altered
from the factory default setting.
^
To reset to the factory default
settings, press the
J
/
M
button.
^
Switch the dishwasher off using the
K
button.
Operation
36