"Replenish salt" message
^
Fill the salt reservoir with dishwasher
salt for reactivation when the
F
Replenish salt
message appears.
(If it appears during a programme,
wait until the end of the programme).
^
Confirm by pressing the middle of the
three buttons beside the display.
The "Replenish salt" message will go
out.
After the salt reservoir has been filled,
the "Replenish salt" message may still
appear in the display if the salt
concentration has not yet reached the
correct level.
If this is the case, press the middle
button again.
The replenish salt message will not
appear if the dishwasher has been
programmed for a water hardness level
of less than 0.7 mmol/l (4 °d German
scale).
,
After filling the salt reservoir, run
the Quick wash programme immedi-
ately (without any crockery in the
dishwasher, and without selecting
the Turbo function) to remove any
traces of salt from the cabinet.
If you only ever use combination
products containing salt and rinse
aid in your dishwasher, you can
switch the reminders off if you wish
(see "Settings menu - Replenish salt
and rinse aid reminders").
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to
replenish the salt and rinse aid and
to switch the reminders back on.
Before using for the first time
19
Содержание for dishwashers
Страница 73: ...73 ...
Страница 74: ...74 ...
Страница 75: ...75 ...
Страница 76: ...Alteration rights reserved G5620 G5625 G5630 G5635 4611 M Nr 09 276 810 00 ...