Miele FNS 37402 i Скачать руководство пользователя страница 39

Страница: 39 / 80

Cleaning and care

Cleaning the interior and
accessories

Clean the appliance at least once a
month.

Clean up any spills, stains or food
immediately. Do not allow them to dry
and stick to the appliance.



Clean the

interior

with a clean

sponge, lukewarm water and a little
washing-up liquid.



After cleaning, wipe with a clean,
damp cloth and then dry with a soft
cloth.

The following parts

cannot be cleaned

in a dishwasher

– Freezer drawers

– The trim

– Shelves

– Telescopic runners on the shelves

– Cool packs



Clean these parts by hand.

The ice cube tray is

dishwasher safe

The maximum temperature of the
dishwashing programme selected
must not exceed 55 °C.

Contact with natural dyes from
carrots, tomatoes and ketchup may
discolour the plastic parts in the
dishwasher.
This discolouration does not affect the
stability of the parts.



Wipe the telescopic runners with a
well-wrung out damp cloth to clean
them.

Be careful not to wash out the
special lubricant in the telescopic
runners during cleaning.



Leave the appliance door open for a
short time to air out the appliance
and avoid the formation of odours.

Содержание FNS 37402 i

















































































Результаты поиска

Содержание FNS 37402 i

Отзывы:

Бренды по названию

Популярные бренды

Miele FNS 37402 i, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание FNS 37402 i

Отзывы:

Бренды по названию

Популярные бренды