manualshive.com logo in svg

Miele FNS 28463 E ed/cs, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele FNS 28463 E ed/cs Скачать руководство пользователя страница 20

Accessories

20

Accessories supplied

Cool pack

The cool pack prevents the temperature
in the freezer section from rising too
quickly in the event of a power cut. This
can help prolong the storage life.

The cool pack will be at its most
effective after it has been in the freezer
for approx. 24 hours.

Door opening angle limiter

The door hinges are set ex works to
enable the door to be opened up to
115°. If the appliance door hits an
adjacent wall when opened, for
example, the opening angle can be
limited to approx. 90°.

Side-by-side fitting kit

For installing two appliances next to
each other.

Optional accessories

A range of useful Miele accessories and
care products are available for your
appliance.

Accessories are available to order via
the Miele Webshop, from Miele
directly (see back cover for contact
details) or from your Miele dealer.

Multi-purpose microfibre cloth

The microfibre cloth is suitable for
removing fingerprints and light soiling
from surfaces such as stainless steel,
glass, plastic and chrome without the
use of chemicals.

MicroCloth Kit

The MicroCloth Kit contains a universal
cloth, a glass cloth and a polishing
cloth. 
These cloths are extremely rip-proof
and hard-wearing. Thanks to very fine
microfibres these cloths achieve
excellent cleaning results.

Содержание FNS 28463 E ed/cs









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды