Before using for the first time
^
Clean the inside of the appliance and
the accessories with warm water and
a little washing up liquid, and then
dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1½ and 2 hour after
transporting it to its final location
before connecting it to the mains.
Switching on
^
Using a coin, turn the temperature
selector in a clockwise direction
away from the "0" position until the
temperature display lights up.
Forcing it beyond its range will
damage it. Turn it only as far as it will
go, then turn it back again.
The alarm indicator light will light up. It
will go out when the temperature in the
freezer is cold enough.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
Cool pack
Place the cool pack in the top drawer
or, to save space, on the freezer tray.
The cool pack will be at its most
effective after it has been in the freezer
for approx. 24 hours.
Switching off
^
Using a coin, turn the On/Off dial in
an anti-clockwise direction back to
the "0" position.
All the indicator lights go out and the
cooling system is switched off.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday,
^
switch the appliance off,
^
switch off at the wall socket and
withdraw the plug,
^
clean the appliance out and
^
leave the door ajar to air the
appliance.
If, during a long absence, the
appliance is switched off but not
cleaned out and the door is left shut,
mould and odours are likely to build
up inside the appliance.
Switching on and off
12
