Miele FN 35402 i Скачать руководство пользователя страница 55

Страница: 55 / 84

Switching off Demo mode

The

is illuminated in the display.

Touch the settings sensor.

All symbols that can be selected
appear in the display and the

symbol

flashes.

Touch the sensors for setting the
temperature (

) repeatedly until

the symbol for the

flashes in the

display.

Touch the OK sensor to confirm your
selection.

flashes in the display (Demo mode is

active) and the

symbol is illuminated.

Touch the

sensor so that

appears in the display (Demo mode
is inactive).

Touch OK to confirm your selection.

The setting is saved and the

symbol

flashes.

Touch the settings sensor to leave
settings mode.
Otherwise, the electronics will leave
settings mode automatically after
approx. one minute.

The Demo mode is switched off and the

symbol disappears.

Information for Miele Centers and Chartered Agents

Содержание FN 35402 i





















































































Результаты поиска

Содержание FN 35402 i

Отзывы:

Бренды по названию

Популярные бренды

Miele FN 35402 i, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание FN 35402 i

Отзывы:

Бренды по названию

Популярные бренды