manualshive.com logo in svg

Miele F 2462 SF, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele F 2462 SF Скачать руководство пользователя страница 111

Frequently Asked Questions

111

Problems with the ice/water dispenser

Problem

Possible cause and solution

The Ice/Water dis-
penser cannot be
switched on.

The appliance is not connected to the power supply.

Check that the appliance is connected to the elec-
tricity supply.

The system lock of the Ice/Water dispenser is active
(the 

 sensor control is highlighted in white).

Switch off the system lock (see “Operating the Ice/
Water dispenser – Switching the system lock on/
off”).

The ice/water dispenser
is not immediately
ready for operation af-
ter having been
switched on.

This is not a fault. After the appliance door has
opened and closed, it can take several seconds un-
til the ice/water dispenser is ready for operation.

No ice cubes are dis-
pensed.

The Ice/Water-dispenser spout is blocked by frozen
ice.

Remove the ice that has clumped together.

Empty the ice container at the latest if you have
not produced any ice for a week (see “Emptying
and cleaning the ice container” in “Cleaning and
care”).

After the Ice/Water dispenser has been switched on,
it can take up to 24 hours until the first serving of ice
cubes is ready.

The chilled water from
the Ice/Water dispenser
does not taste good.

If you dispense chilled water again after a longer pe-
riod of time, it may be stale.

In this case, pour out the first 15 glasses of water.

Содержание F 2462 SF





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды