Miele ESW 7010, Инструкции по эксплуатации и монтажу

Страница: 16 / 64

Before using for the first time
16
 Remove any protective wrapping and
stickers.

Do not remove stickers carrying
safety or installation information or
the data plate.
This makes it easier to perform
servicing and repair work.
Cleaning the drawer for the
first time
 Remove the anti-slip mat and the
rack, if present, from the drawer.
Clean them with warm water and a
little washing-up liquid applied with a
clean sponge or with a clean, damp
microfibre cloth.
 Dry the mat and the rack with a soft
cloth.
 Wipe the drawer inside and out with a
damp cloth to remove any dust or
left-over packaging.
 Dry all surfaces with a soft cloth.

Refit the anti-slip mat and the rack (if
applicable) in the drawer.
Heating up the drawer for the
first time
Heat the empty drawer for at least
2 hours.
 Switch the drawer on by touching the
On/Off

sensor.
 Touch the  sensor repeatedly until
the  symbol lights up.

Touch the

sensor repeatedly until
the segment on the far right-hand
side of the temperature display lights
up.
 Touch the  sensor repeatedly until
2h lights up.
 Close the drawer.
The drawer is fitted with a contact
switch. This ensures that the heating
element and fan in the appliance only
work when the drawer is closed.
The drawer will switch itself off
automatically after 2 hours.
The metal components have a
protective coating. This may give off a
slight smell when the drawer is heated
up for the first time. The smell and any
vapours given off will dissipate after a
short time and do not indicate a faulty
connection or appliance.
Ensure that the kitchen is well ventilated
when heating the drawer for the first
time.