Miele DAR 1**0, Инструкции по эксплуатации и монтажу

Страница: 32 / 39

Installation
32
BTU Reducing Nozzle Set
If a shorter distance between the
exhaust hood or wall unit and the gas
cooktop is required than that allowed
by the burner output, the burner output
of the Miele Range Tops and the Miele
Range Gas Cooktops can be reduced.
This requires the use of the nozzle set
supplied with the unit.
The nozzle sets can also be ordered as
a replacement part.
 Please observe the conversion
instructions for the nozzle set as well
as the operating instructions for the
gas cooktop or the installation
instructions for the range.
Installation recommendations
– A distance of at least 26" (660 mm) is
recommended above electric
cooktops to provide more workspace
and easier cooking under the hood.
– When selecting an installation height,
always take the user height into
consideration. Users should have
ample space to work comfortably on
the cooktop and reach the ventilation
hood controls with ease.
– Please note that the greater the
distance from the cooktop, the less
effective the hood is at drawing in the
cooking vapors.
– To achieve optimal vapor extraction,
make sure that the hood covers the
cooktop. The hood should be
positioned centrally over the cooktop,
not to the side or rear.
– The cooktop should be no wider than
the hood. Preferably, it should be
narrower.
– The mounting area must be easily
accessible. The ventilation hood
should be easy to reach and
disassemble in case a service call is
necessary. This should be taken into
consideration when planning the
position of cabinetry, shelves,
ceilings or decorative elements in the
vicinity of the ventilation hood.