![background image](http://html.mh-extra.com/html/miele/dad-4840/dad-4840_operating-and-installation-instructions_236620020.webp)
Before using for the first time
20
Connecting via WPS
Your WiFi router must support WPS
(WiFi Protected Setup).
With the deflector plate retracted,
touch the On/Off switch
.
All symbols light up with reduced
brightness.
Press and hold the run-on option
control
until the grease filter
and charcoal filter
symbols light
up.
Touch
2
.
The deflector plate extends.
2
will light up constantly,
3
will flash.
The WiFi connection must be started on
the cooker hood at the same time as on
the WPS router.
Press
B
on the cooker hood after a
few seconds.
After a short while,
2
will light up
constantly, and
3
and
B
will flash.
The cooker hood is ready for
connection for the next two minutes.
Start the WPS connection on your
WiFi router.
When successfully connected,
2
and
3
will light up constantly.
Quit connection mode on the cooker
hood by touching the run-on option
control
.
The cooker hood can now be operated
via the app.
If the connection fails, you have
probably not activated WPS on your
router quickly enough. Repeat the steps
above.
Tip:
If your WiFi router does not support
WPS, please connect via the Miele app.
Содержание DAD 4840
