manualshive.com logo in svg

Miele DA 6881, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele DA 6881 Скачать руководство пользователя страница 4

IMPORTANT SAFETY INSTRUCTIONS

4

Children

 

As with any appliance, close supervision is necessary when used

by children.

 

Please supervise children in the vicinity of the hood and do not let

them play with it.

 

Danger of suffocation! Ensure that any plastic wrappings, bags,

etc. are disposed of safely and kept out of the reach of children.

Technical safety

 

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,

OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

– Use this appliance only in the manner intended by the

manufacturer. If you have questions, contact Miele.

– Before servicing or cleaning the appliance, switch power off at the

service panel and lock the service disconnecting means to
prevent power from being switched on accidentally. If the service
disconnecting means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.

 

CAUTION: To Reduce The Risk Of Fire And Electric Shock Install

This Rangehood Only With Internal Blower Miele DAG 600 Or
External Blower Miele DAG 1000.

 

Installation, repair and maintenance work should be performed by

a Miele authorized service technician in accordance with national
and local safety regulations and the provided installation
instructions. Contact Miele’s Technical Service Department for
examination, repair or adjustment. Repairs and other work by
unauthorized persons could be dangerous and may void the
warranty.

 

A damaged ventilation hood can be dangerous. Always check for

visible signs of damage. Never use a damaged ventilation hood.

Содержание DA 6881









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды