To close the housing
^
To close the housing again, raise the
canopy
a
up by pushing on the
second glass slat from the top as
shown, until it engages back into the
filter housing
b
.
Do not push on the extended glass
slats.
Make sure that the canopy is correctly
engaged on the left and right hand
side, otherwise the cooker hood cannot
be switched on again.
^
The fan can be switched on again by
touching the power level sensor
1
to
4
required.
^
The hob lighting can be switched on
again by touching the Hob lighting
sensor
n
.
Grease filters
The grease filters should be cleaned
regularly (at least every 3-4 weeks) to
avoid a build-up of grease.
They should be cleaned immediately if
the
l
sensor lights up.
,
An oversaturated filter is a fire
hazard.
^
To remove the grease filters, lower
the cooker hood into the
maintenance position (see "Position
for maintenance").
^
Open the catch for the grease filters,
hinge the filter forwards as shown,
and lift out.
Cleaning and care
25
dai2435
dai2447
Содержание DA 6000 W
