background image

IMPORTANT SAFETY INSTRUCTIONS

11

 

The information provided in “Installation” must be observed when

installing the ventilation hood.

 

Components can have sharp edges which may cause injury.

Wear gloves to protect your hands.

 

When installing the exhaust duct, only use pipes or tubes made of

non-flammable material. These can be obtained from your Miele
dealer or from Miele Technical Service.

 

Exhaust air should not be vented into a chimney or vent flue which

is otherwise in use and should not be channeled into ducting which
ventilates rooms with fuel-burning installations.

 

If exhaust air is to be extracted into a chimney or ventilation duct

no longer used for other purposes, seek professional advice.

 

WARNING: TO REDUCE THE RISK OF FIRE USE ONLY METAL

DUCTWORK.

Cleaning and maintenance

 

There is a risk of fire if cleaning is not completed according to the

instructions in this manual.

 

Never use a steam cleaner to clean the ventilation hood.

The steam can reach the electrical components and cause a short
circuit.

Accessories

 

Use only genuine original Miele parts. If parts or accessories from

other manufacturers are used, the warranty will become void.

Содержание DA 5428 W

















































Отзывы: