Activating and altering the operating
hours counter for the charcoal filter
(...U models only)
The charcoal filter is needed for
recirculation mode.
On delivery, the operating hours
counter for the charcoal filter is
switched off
, and is set at
unlimited
.
For recirculation mode, the operating
hours counter needs to be set to the
required time:
^
Press the On/Off control to switch the
fan off.
^
Press the
+
control and the operating
hours control at the same time.
The blue indicator lamp for the
operating hours control and one of the
–
/
+
control lamps will flash.
The
–
/
+
control lamps show the time
which has been set:
1st lamp from the left =
120 hours
2nd lamp from the left = 180 hours
3rd lamp from the left = 240 hours
4th lamp from the left =
unlimited
^
Use the
–
/
+
controls to select the
desired time.
^
Confirm the selection by pressing the
operating hours control.
All the indicator lamps will go out.
If you do not confirm your selection
within 4 minutes, the cooker hood
will automatically revert to the "old"
data.
Resetting the operating hours
counter for the charcoal filter
The indicator lamp for the operating
hours control will light up
blue
after the
cooker hood has operated for the
number of hours set. The
charcoal
filter
must then be replaced with a new
one.
Afterwards, the operating hours counter
must be reset.
^
Press the operating hours control for
about 3 seconds while the fan is
switched on.
The indicator lamp for the control will
go out.
Use
20
Содержание DA 5100 D
