Miele DA 4248V D Скачать руководство пользователя страница 17

Страница: 17 / 60

Before using for the first time

Selecting extraction mode

This ventilation hood must be set to
extraction mode. The power of the
blower is adapted to suit the selected
mode of operation.



Switch off the blower and the lighting.



Press the



control and the filter

saturation indicator



at the same

time.

The charcoal filter symbol



and one of

the blower power level indicators will
flash.



Press and hold the



control until the

indicator lights up.



Confirm the selection by pressing the
filter saturation indicator



All the indicator lights will go out.

Extraction mode has now been set.

If the new setting is not confirmed
within 4 minutes, the ventilation hood
will revert to the previous setting.

Setting up Miele@home

Requirement:

- Home WiFi network

Your ventilation hood is equipped with
an integrated WiFi module. The
ventilation hood can be connected to
the household WiFi network.

You will then be able to operate the
ventilation hood via the Miele app.

Before installing the ventilation hood
in its final location, ensure that the
signal of your WiFi network is strong
enough.

Please note that you cannot set up a
WiFi connection at the same time as a
wireless connection (Con@activity 2.0,
remote control).

You can connect to the household WiFi
network via the Miele app or via WPS.

Miele App

The Miele App is available to download
free of charge from the Apple App
Store

or from the Google Play Store™.

Содержание DA 4248V D





























































Результаты поиска

Содержание DA 4248V D

Отзывы:

Похожие инструкции для DA 4248V D

Бренды по названию

Популярные бренды

Miele DA 4248V D, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание DA 4248V D

Отзывы:

Похожие инструкции для DA 4248V D

Бренды по названию

Популярные бренды