Miele DA 420V-6 EXT Скачать руководство пользователя страница 28

Страница: 28 / 64

Cleaning and care

Important for the controls

Do not leave soiling on the controls

for any length of time.
Otherwise they may suffer

discolouration or damage.
Remove soiling straight away.



Please observe the general notes on

cleaning earlier in this section.

Do not use stainless steel cleaning

agents on the controls.

Grease filters

The re-usable metal grease filters in the

appliance remove solid particles

(grease, dust, etc.) from the kitchen

vapours, preventing soiling of the

cooker hood.



An oversaturated filter is a fire

hazard.

Cleaning interval

The grease filters should be cleaned

regularly (at least every 3 - 4 weeks) to

avoid a build-up of grease.
Clean them immediately if the Grease

filter operating hours symbol



lights

up.



You can set the operating hours

counter for the grease filters to suit

the type of cooking you do (see

"Operation").

Removing a grease filter

The grease filter can fall out when

you are handling it.
This can result in damage to the filter

and the hob below.
Make sure you hold the filter

securely at all times when handling

it.

Содержание DA 420V-6 EXT

































































Результаты поиска

Содержание DA 420V-6 EXT

Отзывы:

Miele DA 420V-6 EXT, Инструкции по эксплуатации и монтажу, Страница: 28 / 64

Результаты поиска

Содержание DA 420V-6 EXT

Отзывы: