Installation
45
a
1 exhaust socket
for exhaust
ducting
150 mm.
b
1 reducing collar
for exhaust
ducting
125 mm.
c
1 non-return flap
for fitting into the
exhaust socket on the motor unit
(not needed for recirculation mode).
d
1 connector
for flat ducting to the
rear or the side (only for EXT
models).
e
Conversion kit for recirculation
mode
(the conversion kit is not
supplied and must be ordered
separately; see “Technical data”).
The kit contains an exhaust grille
and aluminum hose with hose clips.
4 M5 x 40 mm screws, 4 washers,
4 M5 nuts
for securing the rangehood
to an interim shelf.
10 M4 x 8 mm screws
for securing the
rangehood and with EXT models for
securing flat ducting and the cover to
the casing.
M4 x 12 mm screws
for additional
securing of the rangehood to uneven
surfaces.
Keep the following in a safe place:
Montage
Installation
Montaje
Montaggio
Montering
Montagem
Asennus
Installation instructions
Содержание DA 2628
