^
Clean the grease filter
-
by hand:
use a scrub brush in
warm water with a mild detergent.
-
in a dishwasher:
place the filter in
the lower basket, making sure that
the spray arm is not blocked.
Depending on the detergent,
cleaning the grease filter in a
dishwasher may cause permanent
discoloration of the filter surface.
Performance of the filter will not be
affected by this discoloration.
^
After cleaning, the filter can be
placed on a towel to air dry.
^
For cleaning the decor cover
determine "Cleaning the casing".
^
While the filter is removed, clean any
dirt or grease from the filter casing to
prevent the risk of fire.
^
After returning the grease filter, press
the grease filter button for 3 seconds
to reset the timer.
The indicator light will go out.
^
If the grease filter is cleaned before
the timer has reached its maximum,
the grease filter button should be
pressed for 6 seconds to reset the
counter to zero.
Inserting the grease filter
^
Angle the grease filter into position
toward the front of the hood.
^
Once the front edge of the filter is in
place, push up the rear of the filter so
that both sides click into place.
Inserting the decor cover
^
Hook the decor cover on to the
latches on the rear panel of the
chimney. Push the cover up at the
front so that it clicks in place.
Cleaning and Care
18
Содержание DA 249-3
