The central spout
^
Pull the central spout down as far as
it will go (
a
), and pull the cover to
the spout forwards to remove it (
b
).
^
Turn the cover around, push the
insert up and out and then clean both
parts thoroughly.
^
Slide the insert back into the cover
until it clicks into place.
^
Pull out the jets in the central spout.
^
Remove the two rubber stoppers (
a
)
and manually clean these and the
jets thoroughly. If required, remove
the air intake tube (
b
). Any
blockages can be dislodged by
kneading or "blowing through" the
tube.
Do not use a needle or similar
implement. This would damage the
components.
^
Replace the stoppers.
^
After cleaning, push the jets firmly
back into place on the central spout,
ensuring they are secure.
^
Replace the cover and then push the
central spout back up into position.
Cleaning and care
56
Содержание CVA 5065
Страница 83: ...83 ...
Страница 84: ...Alteration rights reserved 4112 CVA 5065 M Nr 09 249 350 01 ...