manualshive.com logo in svg

Miele CT 400 MP, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele CT 400 MP Скачать руководство пользователя страница 31

Built-in Tepan

The appliance must only be
operated when built-in. This is to
ensure that all electrical parts are
shielded. Live parts must not be
exposed.

Please ensure that the connection data
quoted on the data plate match the
household mains supply.

Connection should be made via a
suitable isolator or a double pole fused
spur connection unit which complies
with national and local safety
regulations and the on/off switch should
be easily accessible after the appliance
has been built in.

If the switch is not accessible after
installation (depending on country) an
additional means of disconnection must
be provided for all poles.

For extra safety it is advisable to install
a residual current device (RCD) with a
trip current of 30 mA.

When switched off there must be an
all-pole contact gap of 3 mm in the
isolator switch (including switch, fuses
and relays).

Important

This appliance is supplied for
connection to a single phase 230-240 V
50 Hz supply with a 3-core cable.

The wires in the mains lead are
coloured in accordance with the
following code:

Green/yellow

= earth

Blue

= neutral

Brown

= live

WARNING
THIS APPLIANCE MUST BE
EARTHED

Important

The electrical safety of this appliance
can only be guaranteed when
continuity is complete between it and
an effective earthing system, which
complies with current local and national
safety regulations. It is most important
that this basic safety requirement is
present and tested regularly and if
there is any doubt the electrical wiring
in the home should be inspected by a
qualified electrician. The manufacturer
cannot be held liable for the
consequences of an inadequate
earthing system such as an electric
shock.

The manufacturer cannot be held
liable for damage which is the direct
or indirect result of incorrect
installation or connection.

Electrical connection

31

Содержание CT 400 MP



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды