Miele CSDA 7001 FL, Инструкции по эксплуатации и монтажу

Страница: 22 / 80

Cleaning and care
22

Risk of burning due to hot
surfaces.
The surfaces will be hot after use.
Switch the downdraft extractor and
the cooking elements off.
Allow the surfaces to cool down
before cleaning the downdraft
extractor.

Risk of damage due to moisture
ingress.
The steam from a steam cleaning
appliance could reach electrical
components and cause a short
circuit.
Do not use a steam cleaner to clean
the downdraft extractor.
The use of unsuitable cleaning
agents can cause the surfaces to
discolour or alter. All surfaces are
susceptible to scratching.
Remove any residual cleaning agent
immediately.
Never use abrasive sponges or
cleaning agents.
Allow the SmartLine appliance to
cool down before cleaning.

Clean the SmartLine appliance and
accessories after each use.
 Dry the SmartLine appliance
thoroughly every time after cleaning
to avoid limescale residue.
Unsuitable cleaning agents
To avoid damaging the surfaces of the
appliance, do not use:
- washing-up liquid,
- cleaning agents containing soda,
alkalines, ammonia, acids or
chlorides,
- cleaning agents containing descaling
agents,
- stain and rust removers,
- abrasive cleaning agents, e.g.
powder cleaners and cream cleaners,
- solvent-based cleaning agents,
- dishwasher cleaner,
- grill and oven cleaners,
- glass cleaning agents,
- hard, abrasive brushes or sponges
(e.g. pot scourers), or sponges which
have been previously used and still
contain abrasive cleaning agents,
- dirt erasers.