manualshive.com logo in svg

Miele CS 1223-1, Инструкции по эксплуатации и монтажу, Страница: 25 / 52

Поделиться
Скачать
Miele CS 1223-1 Скачать руководство пользователя страница 25

Cleaning and care

25

Danger of burning.

The cooking zone must be switched
off. The wok must have cooled
down.

Danger of injury.

The steam from a steam cleaning ap-
pliance could reach electrical com-
ponents and cause a short circuit.
Do not use a steam cleaner to clean
the wok.

The use of unsuitable cleaning
agents can cause the surfaces to
discolour or alter.
All surfaces are susceptible to
scratching.
Remove any residual cleaning agent
immediately.

Allow the CombiSet to cool down
before cleaning.

The CombiSet and accessories
should be cleaned after each use.

Dry the CombiSet after using water to
clean it. This helps prevent limescale
deposits.

Unsuitable cleaning agents

To avoid damaging the surfaces of your
appliance, do not use:

– washing-up liquid,

– cleaning agents containing soda, al-

kalines, ammonia, acids or chlorides,

– cleaning agents containing descaling

agents,

– stain or rust removers,

– abrasive cleaning agents, e.g.

powder cleaners and cream cleaners,

– solvent-based cleaning agents,

– dishwasher cleaner,

– grill and oven cleaners,

– glass cleaning agents,

– hard, abrasive brushes or sponges,

e.g. pot scourers, or sponges which
have been previously used with ab-
rasive cleaning agents,

– melamine eraser blocks.

Содержание CS 1223-1





















































Отзывы:

Нет отзывов