Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
48
Preparing the worktop
Make the worktop cut-out as shown
in “Building-in dimensions” or as cal-
culated (see “Installing several Pro-
Line appliances”). Remember to
maintain the minimum safety dis-
tances (see “Safety distances”).
Wooden worktops
Seal any cut surfaces on the wood
worktops with a special varnish, silic-
one rubber, or resin to prevent the
wood from swelling as a result of
moisture. The sealant must be heat-
resistant.
Make sure that the sealant does not
come into contact with the top of the
worktop.
P
osition the spring clamps
and the
spacer bars
at the top edge of the
cut-out in the positions shown in the
illustrations.
Secur
e the spring clamps
and
spacer bars
with the 3.5 x 25 mm
wood screws supplied.
