manualshive.com logo in svg

Miele CS 1018 G, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele CS 1018 G Скачать руководство пользователя страница 21

Using for the first time

21

Please stick the extra data plate for
the appliance supplied with this
documentation in the space provided
in the "After sales service, data plate,
warranty" section of this booklet.
Alternatively, the additional label can
be stuck near the appliance if the
appliance markings are not visible
after installation.

Remove any protective wrapping and
stickers (but not the data plate).

Cleaning the CombiSet for the
first time

Clean all removable parts of the
burner(s) with a solution of warm
water and a small amount of
washing-up liquid applied with a soft
sponge. Dry all parts thoroughly after
cleaning and then reassemble the
burners (see "Cleaning and care -
Burners").

Clean the stainless steel trough with a
damp cloth, and then wipe dry.

Switching on the CombiSet for
the first time

The metal components have a
protective coating which when heated
for the first time will give off a slight
smell and possibly some vapours.

The smell and any vapours given off do
not indicate a faulty connection or
appliance and they are not hazardous
to health.

Содержание CS 1018 G





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды