Miele CS 1011, Инструкции по эксплуатации и монтажу

Страница: 47 / 52

After changing the jets
^
Reassemble the burner parts in the
reverse order.
^
Check all gas fittings for leaks by
operating the burner without the
upper section of the cooktop in place
(use a match to ignite the flame).
^
Remove the loose burner parts again.
^
Replace the upper section of the
cooktop.
^
Screw the burner bases into place,
and replace the other parts of the
burner. Take care to reassemble the
different parts in the correct order.
^
Replace the control knob.
^
Finally ignite all the burners to check
that they are operating correctly.
The flame must not go out on the lowest
setting, or when the control is turned
quickly from a high to a low setting.
On the highest setting, the flame must
have a distinctive and visible core.
^
Adhere the label supplied with the
jets above the label stating the type
of gas being used.
Conversion to another type of gas
47