manualshive.com logo in svg

Miele CS 1011-1, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele CS 1011-1 Скачать руководство пользователя страница 58

Converting to another gas type

*INSTALLATION*

58

Risk of explosion due to an in-

correct conversion.
If the conversion to another type of
gas is carried out incorrectly, it may
result in gas leakage.
Conversion from one type of gas to
another must only be undertaken by
an approved and registered gas in-
staller in strict accordance with cur-
rent local and national safety and
building regulations (GasSafe in the
UK). The installer is responsible for
ensuring that the appliance functions
correctly when installed.

Jet table

The jet markings refer to a ¹/₁₀₀ mm
bore diameter.

Main jet

Simmer ad-

justment jet

Natural gas H

1.75

Nr. 34

0.88/0.42

Liquid gas

1.12

Nr. 7

0.60/0.23

Changing the jets

Disconnect the hob from the electri-
city supply and turn off the gas sup-
ply.

When converting to another type of
gas, both the main 

and

 small jets

need to be changed.

The upper part of the appliance has to
be removed before the jets can be
changed.

Remove the burner caps 



, burner

ring 

 and burner head 

.

Undo the screws 

.

Pull the control knob off.

Содержание CS 1011-1





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды