If you cannot remove the brew unit or
can only do so with difficulty, the brew
unit is not in the correct position (See
"Problem solving guide").
After taking the brew unit out of the
machine do
not
change the position
of the brew unit handle, as this
would cause the brew unit to be out
of alignment and you will not be able
to push it back into the coffee
machine.
^
Clean the brew unit
by hand under
warm running water
without using
washing-up liquid.
^
Wipe any remaining coffee off the two
filters. One filter is located in the
funnel and the other to the left of the
funnel.
^
Dry the funnel to prevent ground
coffee sticking to it the next time a
coffee is prepared.
^
Clean the inside of the coffee
machine. Use your vacuum cleaner
to remove dry coffee grounds.
To replace the brew unit, repeat the
previous steps in the reverse order:
^
Push the brew unit back into the
coffee machine, making sure it goes
in straight.
^
Press the button under the handle of
the brew unit
a
and, whilst doing so,
turn the handle to the right
b
.
^
Close the machine door.
Cleaning and care
46
Содержание CM 6100
