Miele AU Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 80

Miele AU Скачать руководство пользователя страница 54

With the aid of the following guide, minor problems can be easily corrected
without contacting Miele. This will save time and money.
Please note that a call-out charge will be applied to unnecessary service visits
where the problem could have been rectified as described in these operating
instructions.

Please note:

,

Installation work and repairs to electrical appliances must only be carried

out by a suitably qualified and competent person in strict accordance with
current local and national safety regulations. The manufacturer cannot be held
liable for unauthorised work.

Technical problems

Problem

Possible cause

Remedy

The Start/Stop indicator
does not flash after the
dishwasher has been
switched on using the
On/Off button

K

.

The appliance is not
plugged in.

Insert the plug and switch
on at the socket.

The fuse is defective or
has tripped.

Reset or replace the fuse
(Minimum fuse rating -
see data plate).

The dishwasher stops
during a programme.

The fuse is defective or
has tripped.

– Reset or replace the

fuse (Minimum fuse
rating - see data plate).

– If the same mains fuse

trips again, call Miele.

Problem solving guide

54

«
...
52
53
54
55
56
...
»

Содержание AU

















































































Отзывы:

Нет отзывов