Setting the rinse aid dosage
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from
approx. 0-6 ml. It is set to a
recommended setting of approx. 3 ml
at the factory.
If spots appear on crockery and
glassware:
^
Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
^
Decrease the rinse aid dosage.
^
Switch the dishwasher off with the
On/Off button
s
.
^
Turn the programme selector to the
"12 o'clock" position.
^
Press the Start/Stop button in and
whilst holding it in
switch the
dishwasher on using the On/Off
button
s
.
Keep the Start/Stop button pressed in
for at least four seconds until the
"Start/Stop" indicator light comes on.
If this does not happen, start the
procedure from the beginning again.
^
Turn the programme selector to the
"5 o'clock" position.
The "Wash/Rinse" programme
sequence indicator will flash briefly
three times at intervals.
This means that approx. 3 ml of rinse
aid will be used per programme
(factory default setting).
The number of times the "Wash/Rinse"
indicator flashes tells you the rinse aid
dosage which has been set (see chart).
Rinse aid
in ml
Flashing
0
-
1
Once
2
Twice
3
Three times
4
Four times
5
Five times
6
Six times
^
Use the Start/Stop button to select
the number of flashes which equates
to the rinse aid dosage you want.
Each press on the button moves you
up a level.
The programmed rinse aid dosage is
now stored in memory.
^
Switch the dishwasher off with the
On/Off button
s
.
Before using for the first time
20
Содержание ADVANTA SERIES G 2020
Страница 58: ...58 ...
Страница 59: ...59 ...
Страница 60: ...Alteration rights reserved G1020 G1040 G2020 G2040 1106 M Nr 06 702 820 02 en GB ...