Miele 51506263IRL, Инструкции по эксплуатации и монтажу

Страница: 52 / 96

Problem solving guide
52
A fault message appears in the display
1)
Problem Cause and remedy

Container empty
One of the external detergent containers is empty.

Refill the detergent container.

Container 1 empty
External detergent container 1 is almost empty.
The message can refer to containers 1 to 6.
 Refill the detergent container.

Reset the container's early-warning counter (see
“Early-warning counter” under “Supervisor level”)

Check hot water in-
let
The hot water supply is blocked or restricted.
 Check whether the hot water stopcock has been
properly opened.
 Check whether the inlet hose is kinked.

Align machine. Laun-
dry not properly spun
The selected spin speed was not reached during the
final spin due to excessive imbalance.

Check that the washing machine is level.
 Start the spin cycle again.

Machine is leaking
The washing machine or drain valve is leaking.

Close the stopcock.

Call Miele Service.
1
The messages will appear at the end of the programme and when the washing
machine is switched on and must be acknowledged with the
OK sensor control.