Programmable functions
66
Keypad tone
The tone that sounds when a sensor is
pressed can be changed or switched
off.
Options
= Off
=
factory setting
PIN Code
The code prevents your machine
being used without your knowledge.
When the code has been activated, you
have to enter the code after switching
the dryer on. Otherwise the dryer
cannot be operated.
Options
=
Off (factory setting)
= On
If option
has been selected, after
switching on you will have to enter the
code before you can operate the dryer.
Using the dryer when the code is
activated
After the dryer is switched on,
will
flash in the time display.
The code is
and cannot be altered.
Touch the
sensor until a
flashes
in the first position.
Confirm with the
Start/Stop
sensor.
Enter the two other numbers in the
same way.
The dryer is ready for use after
has
been entered and confirmed.
Conductivity
This programmable function should
only be altered if the water is so soft
that it is likely to cause the electronics
which sense residual moisture in the
laundry to give false readings.
Options
=
Off (factory setting)
= Low
Important
The water used for washing the laundry
is extremely soft with a conductivity
reading (electrical conductivity) of less
than 150 μS/cm. To find out the
conductivity level of your mains water,
contact your local water authority.
Make sure that you only activate
for the condition described above.
Otherwise, drying results can be
unsatisfactory.
Содержание 11 588 800
Страница 69: ......
Страница 70: ......
Страница 72: ...M Nr 11 588 800 00 en AU NZ PDR 300 HP SmartBiz ...