Installation
25
a
3 protective installation sheets
for use when installing the chimney
b
1 exhaust connector
for an exhaust duct
6" (150 mm).
c
1 reducer
for an exhaust duct
5" (125 mm).
d
1 non-return flap
for installation in the outlet duct
collar of the motor unit (not for
recirculation mode). Depending on
the device version, the non-return
flap is already mounted.
e
2 protective spacers
for use when fitting the chimney.
f
Wall bracket
for securing the hood on the wall.
g
Recirculation kit for recirculation
mode
contains diverter, aluminum hose
and hose clamps (not contained in
scope of delivery, available as
optional accessory – see "Technical
Data").
8 screws 3/16" x 2 3/8" (5 x 60 mm)
and
8 plugs 5/16" x 2" (8 x 50 mm)
for attaching to the wall(not for use in
USA / CDN).
The screws and plugs are designed
for use in solid walls only.
Use different fasteners for other wall
construction types.
Make sure that the wall can support
the load.
2 x M 6 locknuts
for mounting the appliance unit.
2 screws 1/8" x 5/16" (3.9 x 7.5 mm)
are not required.
1 lever
for disassembling the chimney.
Montage
Installation
Montaje
Montaggio
Montering
Montagem
Asennus
Installation sheet
Содержание 09 968 280
Страница 14: ...Guide to the appliance 14 ...
Страница 24: ...Installation 24 Installation parts ...
Страница 26: ...Installation 26 Appliance dimensions The drawing is not to scale ...
Страница 36: ...M Nr 09 968 280 01 en US DA 5966 W DA 5986 W DA 5996 W ...