Miele 06 868 521, Инструкции по эксплуатации и монтажу

Страница: 34 / 56

6. Delay start and setting the delay
start time
The start of a wash program can be
delayed up to 9 hours and 30 minutes
in 30 minute increments.
Delay start should only be selected with
the "Normal" and "Intensive" programs.
The short programs cannot guarantee
satisfying cleaning results when the
residues are allowed to dry on because
the start time is delayed.
a) To activate Delay Start
^
Turn the program selector to "STOP".
^
Turn the machine off.
^
Press and hold the "Display" and
"Start" buttons,
at the same time turn
the machine on with the "On / Off"
button.
The display shows the current
program status "P...".
The "Fill/Drain" indicator lights.
^
Press the "Extra Drying" button once.
"E01" (programming level 1) is
displayed.
^
Turn the program selector to "Drain"
either "80" or "81" is displayed.
"80" = No Delay Start
"11" = Delay Start active
^
Press "Display" to change from "80" to
"81" or vice versa.
^
Press the "Start" button. "SP" is
displayed.
^
Press the "Start" button again. The
change has been saved.
Value set:
b) Setting the delay start period
The delay start period (from 30 minutes
to 9 hours 30 mins) must be set before
a program is started.
^
After selecting a program (see
"Turning on") press or hold the
"Display" button it until the required
value is displayed. The "Delay Start"
indicator lights.
After the "Start" button is pressed the
delay start period will count down in the
display until the program automatically
starts.
Programming special functions
34