Midway Gauntlet Dark Legacy, Руководство по эксплуатации

Страница: 12 / 61

Gauntlet: Dark Legacy 13
Chapter 2 Service
brackets to mounting panel. Pull monitor carefully from cabinet and set in safe place. Clean CRT face
before reinstalling barrier panels and monitor bezel.
INTERNAL COMPONENTS
B u t t o n s
Open control panel. Mark and disconnect wiring harness at the switches. Bend large prong away from
each switch just enough to slide switch off housing. Separate each switch from its button. Mark switches
and harnesses with player numbers and lay them inside control panel box. Unscrew mounting nut from
housing. Remove button housing through switch hole from front of control panel.
CAUTION.
Video monitor is heavy, with most weight toward front of assembly. Firmly support mon-
itor when you remove it from cabinet.
WARNING. Monitor does not require isolation from AC line voltage in normal operation. However,
when operating outside the cabinet or servicing the monitor on a test bench, you must isolate monitor
from line voltage with an isolation transformer