Midtronics psc-700, Инструкция по эксплуатации, Страница: 5 / 16

5
www.midtronics.com
POWER CHARGE ™ PSC-700
1.4 Position the AC and DC leads to avoid tripping over them and to prevent
damage by hood, doors, or moving engine parts; protect from heat, oil,
and sharp edges.
1.5 Do not operate the charger if it has received a sharp blow, been dropped
or otherwise damaged in any way; take it to a qualified service center.
1.6 Do not disassemble charger; take it to a qualified service center when re-
pair is required. Incorrect reassembly may result in a risk of electric shock
or fire.
1.7 To reduce risk of electric shock, unplug the charger from the AC outlet be-
fore attempting any maintenance or cleaning. Turning off the controls will
not reduce this risk.
Remove marine “boat” batteries
and charge them on shore
Charging marine batteries on-board
requires specially designed equipment for
marine use.
1.8 Connect and disconnect the battery leads only when the AC supply cord is
disconnected.
1.9 Do not overcharge the battery. (See sections 3)
1.10 Charge the battery in a dry, well-ventilated area.
1.11 Never place articles on or around the charger, or locate the charger in a
way that will restrict the flow of cooling air through the cabinet.
1.12 An extension cord should not be used unless absolutely necessary. (See
paragraph 4.3.)
1.13 Have a damaged cord or plug replaced immediately.
1.14 Do not expose the charger to rain or snow.
Personal Precautions
2.1 Always have someone within range of your voice, or close enough to come
to your aid, when working around flooded batteries.
2.2 Have plenty of fresh water and soap nearby in case battery acid contacts
skin, clothing or eyes.