Midtronics MDX-700P HD, Инструкция по эксплуатации, Страница: 8 / 24

MDX-700P HD
8 www.midtronics.com
Option Explanation
View/Print Display the previous test result. Press the PRINT
button to print the results.
QC Mode A quick test to check battery inventory
Export Data Export the last test result to an IR Reader program.
(under development)
Perform Test Begin the Battery Test procedure.
Language Selection Select a language for the tester.
(Default: English)
Set Address Enter the address to display on the top of the printout.
(Limit: 8 lines, 21 characters per line)
Time Select 24-hour or AM/PM and set the time. (Default:
AM/PM)
Date Select the date format as well as set the correct date.
(Default:
MM/DD/YYYY)
Counter Clear or display battery and system test by results.
Contrast Adjust the contrast setting of the tester display.
(Default: 10)
Temperature Units Select the temperature units
Degrees F or Degrees C
(Default: Degrees F)
Voltmeter Automatically test battery voltage when the clamps are
first connected to the battery terminals. Press ENTER
to continue testing the battery. Press BACK to return to
the menu. (Default: ON)
Options Menu
Procedure
1. Press the MENU button to access the Options Menu.
2. Use the
UP
(  ) and
DOWN
(  ) arrows to move to the line you want to edit.
3. Press the ENTER button to make the highlighted line editable.
4. Use the
UP
(  ) and
DOWN
(  ) arrows to select the character for that cur-
sor location.
5. Press the ENTER button to move to the next location.
6. Press the MENU button to return to the Options Menu.