Midtronics GR1-120, Инструкция по эксплуатации, Страница: 17 / 28

Cycled messages inform you that the battery is ready to
be put back into service:
Good Battery / Top-Off
Charging / Hit STOP To End .
TOP-OFF CHARGE COMPLETION
When Top-Off Mode is complete, the charger will alert you
with an alarm and display the battery voltage, battery
condition, and the amount of charge put back into the
battery in amp-hours. The display will alternate between
the final results and a message to press
ENTER
↵ ↵↵ ↵↵
for
the test code. (See “Test Code Generation.”)
The alarm will sound every 30 seconds, until the you
press the
STOP button or disconnect the charger clamps
from the battery.
TEST CODE GENERATION
Before the charge session is finished the display will
alternate between the final results and a prompt to press
the
ENTER
↵ ↵↵
↵↵
button to generate the test code.
Press the INFO ( i ) button to print the test codes and the
final results. To return to the Mode selection screen and
start a new charge session, press the
STOP button.
•
15
•
13.3V 9.4A Top-Off
Good Battery AH: 23.1
13.3V 9.4A Top-Off
Top-Off Charging
AH: 23.1
13.3V 9.4A Top-Off
Hit STOP To End
AH: 23.1
12.74V 0:45:16
Good Battery
AH: 28.2
GR1-120 Charging Modes: Diagnostic Fast Charge
Test Code
↑↓ ↑↓ ↑↓ ↑↓ ↑↓
A1B2C 3D4E5 F6