BEFORE FLYING
Settle in a space without obstacles with a clearance of about ten meters around you and five meters in
height at least.
Ensure that the battery of the drone and batteries from remote control are fully charged.
Before turning the drone, check that the left joystick of the remote controller is completely pulled down in
the center.
PREPARATION FOR TAKE OFF
Connect the battery of the drone, the drone LED lights flash rapidly. Then
place the drone to the ground or on a flat surface and turn on the remote
control.
Before each flight you must establish the link between the drone and
remote control by performing this operation: Push the left joystick fully
upward and then pull it to the bottom. A beep sounds when the joystick is
at the top and another beep when it is at the bottom. The 2 beeps indicate
that the synchronization is successful and that the drone is ready to fly.
When the synchronisation between the drone and the remote
controller is established, simply press on « Auto take-off »
button and the drone will take-off and hover at
approximatively 1 meter height.
You can now start to pilot the drone with the joysticks of the
remote controller. If you press this key again, the drone will
land automatically.
FLYING CONTROL
ACCELERATOR (left joystick)
Push the left joystick up: the drone rises.
Pull the left joystick down: the drone descends.
LEFT / RIGHT TURN (left joystick)
Push the left joystick to the left: the drone turns on itself to the left.
Push the left joystick to the right: the drone turns on itself to the right.
FORWARD / BACKWARD FLY (right joystick)
Push the right joystick up: the drone flies forwards.
Push the right joystick down: the drone flies backwards.
