Step 14.
Slide white wires and clips
through the bottom punch holes.
Slide the retaining nut onto the
wire and tighten the clip down to
the chassis.
Step 15.
Do the same thing for the red
wires.
Step 16.
Slide the ends of the white wires
into the busbars first and then the
red wires into the fuse holders
and tighten down the retaining
screws. All retaining screws in
both the busbar and fuse holders
need to be torgued to 20 in. lbs.
These retaining srews need to be
retorgued again in one hour.
14
14
14
14
15
15
15
15
16
16
Tighten down
the retaining nut.
