2
1
6
7
8
3
4
5
5
4
4
4
3
Rivet dinrail to
chassis
Step 1.
Punch out the plugs on the bottom
of the chassis #3-163-2.
Step 2.
Rivet the dinrail #3-165-1 to the
chassis.
Step 3.
Place the black insulator paper
#5-022-1 on both sides of the
chassis.
Step 4.
Screw down the white plastic
busbar insulators #5-015-2 with
#6-036-1 screws.
Aluminum chas-
sis strips easily. Don’t over
tighten.
Step 5.
Attach busbars #9-037-1 to the
white busbar insulators.
Step 6.
Screw down the center busbar
#9-037-1 with #6-037-1 screws and
#6-017-1 lock washers. These
screws need to be torgued.
Step 7.
Lay down the white insulator paper
#5-036-1 or #5-036-2 around the
dinrail.
Step 8.
Apply all inside labels
#10-008-1
(See page 2)
.
MNPV8 Procedure
May 30, 201
1
Lock washer
#10 internal tooth
#6-017-1
Lock washer
#10 internal tooth
#6-017-1
Pan head screw 10 x 3/8
#6-007-1
Pan head screw
10-32 x 3/8
#6-036-1
Pan head screw
10-32 x 5/16
#6-037-1
