Midland XTC 270, Инструкция по эксплуатации

Страница: 16 / 86

UK
14
Micro SD Card
1. Open and fold down the back rubber cover.
2. Insert Micro SD card into slot observing proper direction (shown sideways).
3. Return rubber flap into place.
NOTE: XTC-270 supports up to 32GB memory card size.
Recording
1. Move the RECORD switch forward. This turns the camera on.
2. The battery and the memory card indicator will turn on showing the status of the camera.
The record indicator will begin
flashing red after 4 seconds. This indicates the camera is capturing video. (1 single Beep)
3. To stop recording, move the RECORD switch back to the off position. (3 Beeps indicate “stop recording”, 2 Beeps to indicate “correct
video saving”)
Note: Don’t remove the battery while recording because the file can be damaged
SD card LED Status Meaning
Green 1 GB or more avai lable
Orange 512 MB to1 GB available
Red Below 512 MB available or no MicroSD card installed.
Flashing Red Cannot read the card
Flashing Green Indicates card has been reformatted.
Memory Size HD Record Time SD Record Time
1 GB 11 minutes 13 minutes
2 GB 22 minutes 26 minutes
4 GB 45 minutes 52 minutes
8 GB 90 minutes 105 minutes
16 GB 175 minutes 210 minutes
32 GB 350 minutes 410 minutes
Note: The camera will divide the video in files of 10 minutes each (approximately 900Mb)