manualshive.com logo in svg

Midland SPD-6, Руководство по эксплуатации, частям и обслуживанию

Поделиться
Скачать
Midland SPD-6 Скачать руководство пользователя страница 272

  

    www.roadwidener.com                                 

                         

272

Model SPD-6

Required tools

The service procedures described in this manual can be performed using common mechanic’s hand
tools. Special tools, if required, are shown. When testing system pressures, calibrate pressure gauges
frequently to ensure accuracy. Use snubbers to protect gauges.

Standard procedures

C

Caution

Contamination can damage internal components and void the manufacturer’s warranty. Take
precautions to ensure system cleanliness when removing and reinstalling system lines

1. With the prime mover off, thoroughly clean all dirt and grime from the outside of the motor. Ensure

the surrounding areas are clean and free of contaminants such as dirt and grime.

2. If removing the motor, tag each hydraulic line connected to the motor. If you disconnect hydraulic

lines, plug each open port to keep dirt and contamination out of the motor.

3. Inspect the system for contamination. Look at the hydraulic fluid for signs of system contamination,

such as oil discoloration, foam in the oil, sludge, or small metal particles.

4. Remove the motor as a single unit.

C

Caution

Be careful not to damage solenoids and electrical connections when using straps or chains to remove

motor from machine.

5. Perform motor function test.
6. Before re-installing the motor on the machine, drain the system, flush all lines, replace all filters, and

fill with new hydraulic fluid.

Service Manual

H1B 060/080/110/160/250 Bent Axis Motors

Required tools and standard procedures

36

11024924 • Rev CB • February 2015

Содержание SPD-6













































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды