Midland GXT2000 Series, Руководство пользователя

Страница: 10 / 24

Model GXT2000/2050 Series
Page 10 www.midlandusa.com
!
!
SETTING PRIVACY CODES
Your GXT2000/2050 Series has 142 Privacy Codes available
which can only be used on channels 1~22. The selected
Privacy
Code may be different for each channel. To select a Privacy Code
for the current channel press the MENU button twice, and then
press the / buttons to select between “Off/CTCSS/DCS.” Press
the MENU button again and the
/
buttons to select one of the 38
CTCSS Codes or one of the 104 DCS Codes .
The Privacy Code icon on the display will indicate whether you set
your Privacy Code in
CTCSS
or
DCS
mode. To confirm the selec-
tion, press the PTT button or press the MENU button again to move
to the next feature setting.
Note
: If you select a CTCSS Privacy Code, any pre-selected
DCS Privacy Code will be cancelled and vice-versa.
Selecting a Privacy Code of “ oF ” will disable the Privacy
feature. To communicate between two GXT2000/2050
Series radios, all radios in your group must be set to the
same channel and Privacy Code selections. The Privacy
Code can only be set in channels 1~22 .
TRANSMIT (TX) POWER LEVEL SELECTION
Your GXT2000/2050 Series has 3 power level settings. To select
the power level on channels 1~7, 15~33 and 38~50, press the
MENU button until a “
Pr
” icon appears blinking on the display. Then
press the
/
buttons to select
TRANSMIT POWER LEVEL icon
(H: Hi / M: Med / L: Lo ) . To confirm, press the PTT button or press
the
MENU
button again to move to the next feature setting.
When
the Battery Meter drops to 1 bar , the TX Power will auto-
matically switch from Hi(H) or Med(M) to Lo(L) level.
Note : You cannot adjust the power setting on the FRS
channels (8~14 and 34~37). They are set to Low power per
FCC regulations.