background image

Display illumination 

If.there.is.insufficient.light.to.read.the.display,.press.briefly.

BT

.and.the.dis-

play.illumination.will.activate.for.about.5.seconds..Every.time.the.

MENU 

is.

pressed,.the.display.will.automatically.light.up.

Power save

The. battery. power. saving. feature. enables. a. reduction. in. the. consumption.

of. up. to. 50%;. power. saving. comes. on. automatically. when. the. transceiver.

does. not. receive. any. signal. for. more. than. 7. seconds.. When. the. batteries.

are.discharged,.the.icon.

CALL

MENU

BT

DW

DCS CTC

H    L

ROGER

1

2

5

3

4

6

8 7

11

9

10

12
13
14

15

25

24

23

22

21

20

19

18

17

16

BT

.appears.on.the.display:.replace.the.batteries.or..

recharge.the.battery.pack..

Battery recharge

The.supplied.battery.pack.is.Ni-MH.type.4.8V.800mAh.and.must.be.recharged.

only.when.it’s.inserted.into.the.radio;.it.takes.8.hours.to.fully.recharge.

To.get.a.better.performance.of.the.batteries.we.suggest.operating.2.or.3.char-

ge/discharge.cycles.before.using.the.radio.for.the.first.time..

To recharge the battery pack:

Connect.the.socket.of.the.wall.adaptor.to.a.mains.power.socket.and.insert.the.

jack.of.the.wall.adaptor.into.the.desktop.charger.plug..

Place.your.transceiver.into.the.cradle.of.the.desktop.charger..The.red.led.of.

the.charger.will.light.up..

When.charging.is.complete.take.the.transceiver.out.of.the.cradle.and.detach.

the.socket.of.the.wall.adaptor.from.the.mains..

!   do  not  overcharge  the  batteries!  When  these  are  fully  charged  the 

charging process  does  not stop automatically. do not forget there-

fore, to remove the transceiver from the charger as soon as the batter-

ies are charged, otherwise the radio and batteries may be damaged.

!  do not try to charge alkaline batteries or non rechargeable batteries. 

Make sure that when you charge the radio, only rechargeable ni-MH 

batteries or the supplied battery pack should be contained in the bat-

tery compartment! alkaline batteries are not rechargeable! Batteries 

which are not suitable to be recharged may leak, explode or even burn 

and cause damage!

!   Using  a  different  battery  charger  other  than  the  one  specified  can 

cause damage to your device or may even cause  explosions and per-

sonal injuries.

!   do not throw batteries into fire or place them near heat as this may 

cause  explosions  or  personal  injuries.  dispose  of  the  batteries  ac-

cording to the procedures set out by local regulations.

!  do not mix old and new batteries or batteries of different types or bat-

teries which have been used in different manners.

WARRANTY

The.Warranty.does.not.limit.the.user’s.(statutory).rights.under.applicable.

National.laws.relating.to.the.sale.of.consumer.products.

During.the.Warranty.period,.the.Manufacturer.or.the.authorized.custo-

mers. service. will,. in. accordance. with. this. Limited. Warranty. ,. remedy.

defects.by.repair.or.replace.the.product.

This.Limited.Warranty.is.only.valid.and.enforceable.in.the.country.where.

the.user.has.purchased.the.product.

Warranty period

The.warranty.period.starts.at.the.time.of.Product’s.original.purchase.by.

the.first.end-user..The.product.may.consist.of.several.different.parts.and.

these.parts.are.covered.by.different.warranty.periods:

.› 24.months.for.the.device

.› 6.months.for.these.following.parts:.battery,.chargers,.headset.,.an-

tennas..

How to get the Warranty service

In.the.event.of.a.product.defect,.please.return.it.to.the.authorized.custo-

mer.service.or.to.the.Manufacturer.himself..To.make.use.of.this.warranty,.

it.is.necessary.to.return.to.the.authorized.service.centre:.

.› The.affected.product.(or.accessory)

.› The.original.proof.of.purchase,.which.clearly.indicates.the.name.and.

address.of.the.seller.and.the.date.and.place.of.purchase.

What the Warranty does not cover

The.warranty.does.not.cover:

.› Normal.wear.and.tear.of.the.product.

.› Defects.caused.by.rough.handling.(defects.caused.by.sharp.items,..by.

bending,.compressing.or.dropping.…)

.› Defects.or.damage.caused.by.misuse.of.the.product,.including.use.

that.is.contrary.to.instructions.provided.by.manufacturer

.› Defects.caused.by.other.factors/acts.beyond.the.reasonable.control.

of.the.manufacturer.

The.warranty.does.not.cover.defects.or.damage.caused.to.the.Product.

by.misuse.with,.or.connection.to,.any.product,.accessory.software.and/

or.services.not.produced.or.supplied.by.the.manufacturer.or.by.use.of.

Содержание G8E-BT











Отзывы: