Midland FLM60H Скачать руководство пользователя страница 32

- 33 -

ƒ

After use store the machine in a place where children have no access. Always allow
the machine to cool down before putting it away.

ƒ

After use store the machine in a place where fuel vapours cannot reach a naked flame
or sparks.

ƒ

In the instance of a long period of non-use, drain the fuel tank completely.

Use of the machine does not require specific lighting.
However, the recommended minimum amount of light (e.g. 200 lux) is enough to be able
to read the notices on the machine and to operate it without running risks caused by poor
light.

16.  CLEANING THE MACHINE

Proceed in the following order:

-

Switch off the engine and disconnect the spark plug wire;

-

Clean the engine and the outside of the machine with a cloth soaked in a little oil.

-

Clean all parts of the machine, particularly the starting unit, air filter, exhaust and
carburetor. It is advisable to follow the instructions given in the engine manual.

-

Clean the inside of the belt guard (Fig. 9 Ref. D) with a blast of compressed air.

-

To clean the inside of the flail guard ( Fig. 1 Ref. H), wash with a jet of water straight
after use while still damp. When washing carefully cover and protect the electrical
parts of the engine, the carburetor, the air filter and the exhaust from the water to
prevent engine problems.

-

To clean the flail area a tool should be used (stick of wood).

17. SEASONAL LONG-TERM STORAGE PERIODS

To store the flail mower for prolonged periods of non-use, proceed as follows:

-

Park the machine on flat, firm, clean ground.

-

Oil deposits on the ground where the machine is positioned may cause irreparable
damage to the tyres.

-

Disconnect the spark plug wire;

-

Clean the machine carefully as described in section 16 (Cleaning the machine)

-

Make sure that all screws and nuts are fully tightened.

-

Retouch with paint any parts which have become exposed during use.

-

Store the machine in a clean, dry place.

-

Empty the fuel tank, following the instructions given in the engine manual;

-

Regularly check the tyre pressure, and adjust if necessary.

-

Lubricate all moving parts and have any necessary repairs to the machine carried out.

Содержание FLM60H







































Отзывы: