Midland enerjump, Инструкция пользователя

Страница: 11 / 44

ENERJUMP - 09
SAFETY INSTRUCTIONS / WARNINGS
    
• Charge Enerjump fully prior to use.
• WARNING: Keep the unit clear of fire and water.
• WARNING: Shock Hazard. Keep away from children. Do not insert foreign
objects into the jumper cables port/jack, the USB output port, or the DC input
jack. Do not open Enerjump .
• WARNING: Explosion Hazard. Do not use this product where there are flam-
mable fumes or gases, such as in the bilge of a gasoline-powered boat, or near
propane tanks.
• Do not leave Enerjump completely unattended while being charged; please
check the recharge will proceed regularly.
• Do not charge the device close to flammable substances.
•
WARNING: Fire Hazard. Do not crush or puncture Enerjump . Do not short
circuit metal contacts or cables. Always disconnect the jump start cables from
Enerjump after each use and store separately. The jump start feature is designed
for short term operation only (not more than 3 seconds). Allow Enerjump to
cool down for at least 1 minute after each jump start attempt.
• Do not touch cables immediately after use.
IMPORTANT SAFETY INSTRUCTIONS
• Operating temperature: Using Enerjump at high or low temperatures may re-
duce the internal battery capacity and shorten the battery life. Note: In extreme
cold weather conditions, please bring Enerjump indoors for best results.