Midland CT2000 instruction guide
| 25
Other functions
Activating/deactivating the keypad tones
• Press
FUN
+
[0]
to enable/disable the keypad beep tones.
• When the keypad tones are activated, the display will show l’icona
1
2
3
4
7
10
12
11
8
9
5
6
2
3
4
5
6
1
13
14
15
.
Setting the Time Out Timer:
The time out timer (TOT) automatically switches the radio in reception if you talk
for too long, after a pre-set time that can change from 1 minute up to 30 min.
Before stopping the transmission, CT2000 emits an acoustic alarm to warn you.
We suggest you keeping this function enabled.
Note:
TOT can be adjusted also from the radio menu.
Access the radio menu and follow this procedure:
•
MENU
Utilities
Radio Setting
TOT
• Set the desired time and confirm with
MENU
or
PTT
controls.
• Press
FUN
to exit the menu and return in stand-by mode.
Activating/deactivating the keypad lock:
Press
FUN
+
[5]
to enable or disable the keypad lock.
Or you can also push
F
and then
Lo
on the front panel of the radio.
Display backlight
The display backlight can be adjusted in 3 different levels:
•
ON
: backlight always on;
•
5S
: backlight turns off after 5 seconds;
•
10S
: backlight turns off after 10 seconds.
• Press
FUN
+
[7]
. Select the desired level. Press
PTT
for confirmation or
wait for 5 seconds.
• The backlight label can be adjusted also through the radio menu; follow this
path:
MENU
Utilities
Radio Setting
Back Light
Auto power-off
You can set the automatic turning off for CT2000.
• Enter the radio menu and follow this procedure:
MENU
Utilities
Radio Setting
Auto Power Off
• Set the desired level:
30/60/120
minutes and confirm by pushing
MENU
or
PTT
.
• Press
FUN
to exit the menu and return in stand-by mode.
