24 |
Midland CT890 instruction guide
MENU
. To return to the standby mode, press
EXIT
.
To send out the alert tone, press
PTT
and then keep pressed the side key
PF2.
ANI code tx delay (PTT-DLY) - MENU 42
This function allows you to set the delay in sending the ANI code once
the
PTT
is pressed (ANI delay).
You can set it between 100 and 3000ms (30 levels of 100ms each).
To set the delay press
MENU + 42
; “
PTT-DLY
” will appear on the display.
Press
MENU
to enter the function. Select the desired level with the
▼/▲
keys or by rotating the encoder.
Press
MENU
again for confirmation and
EXIT
to return to standby mode.
Transmitting the ID code (PTT-ID) – MENU 43
With this function you can decide when sending the ANI code in tx mode.
The possibilities are 3:
•
BOT:
the code is sent when you press the
PTT
•
EOT:
the code is sent when the
PTT
is released
•
BOTH:
the code is sent when you press and release the
PTT
In Standby mode press
MENU + 43
; the display will show “
PTT-ID
”.
Press
MENU
to enter the function. Push the
▼/▲
keys or rotate the enco-
der to select the desired option and confirm with
MENU
.
To return to the standby mode, press
EXIT
.
Ring time (INRG) – MENU 44
With this
MENU
you can select the ring time that you hear when the radio
receives its ANI code.
To set the ring time
MENU + 44
; the display will show “
RING
”.
Press
MENU
to enter the function. With the
▼/▲
keys or with the enco-
der selection the desired option:
•
from 1 to 10 seconds
•
OFF
Press
MENU
again for confirmation and
EXIT
to return to standby mode.
