Midland C1179, Инструкция по эксплуатации, Страница: 13 / 17

12 | XT60 user’s manual
ROGER BEEP (End transmission tone)
When your transmission is finished (PTT released), XT60 gives out a sound
that indicates to the other party that s/he can start talking. This function is
enabled by default.
To deactivate it:
1. Press 5 times the MENU button in the PMR band until the display shows
“rb on” ;
2. Using the scroll buttons / select “o ff ” and “rb o ff ” will be displayed;
3. To confirm the roger beep deactivation, press
PTT
button or wait for 5
seconds.
CALL function
XT60 can send 5 di ff erent call tones. To send this audio signal to other users,
press the
CALL/
key.
To select the call tones:
1. Push the MENU button 6 times in the PMR band, until the display shows
“CA 1”.
2. By pushing / you will hear the 5 pre-set melodies.
3. Confirm by pressing the PTT key or wait for 5 seconds.
Now, each time your XT60 sends out a tone call, it will beep with the selected
melody.
Keypad beep
To deactivate the keypad beep, follow these steps:
1. Press for 7 times the MENU button in the PMR band, until “bP on” is
displayed.
2. Use the / buttons until the display shows “bP of” .
3. Confirm by pushing the PTT or wait for 5 seconds.
Now you won’t hear any beep at the pressure of any button.